product catalogue | terminals | screwing technology | sak-series modular terminals | ts 35 | polyamide pa 6.6 | modular feed-through terminals | 2,5 mm2 - 1 - general ordering data order no. 0268860000 part designation sakd 2.5/35 version feed-through terminal, 2.5 mm2, screw connection, pa 66, beige, ts 35 ean 4008190136284 qty. 100 pc(s). product notes note, technical data with twin ferrules zh 0.5 to zh 1.5, rated voltage is 690 v. additional technical data colour of insulating material beige connection direction on side end plate required yes explosion-tested version "ex e" no installation advice ts 35 insulating material pa 66 levels cross-connected internally no no. of identical terminals 1 no. of levels 1 no. of terminal strips per level 2 open sides right operating temperature range - 50 c, + 100 c type of connection screwed type of mounting snap-on ul 94 flammability rating of insulation material v2 version feed-through terminal csa rating data voltage (csa) 300 v csa current 20 a min. cross-section (csa) awg 22 max. cross-section (csa) awg 12 conductors for clamping (additional connection) flexible with ferrule, min. (din 46228 pt 1) 0.5 mm2 flexible with ferrule, max. (din 46228 pt 1) 2.5 mm2
product catalogue | terminals | screwing technology | sak-series modular terminals | ts 35 | polyamide pa 6.6 | modular feed-through terminals | 2,5 mm2 - 2 - conductors for clamping (rated connection) clamping range, min. 0.33 mm2 clamping range, max. 4 mm2 type of connection screw connection 2nd type of connection screwed connection direction on side no. of connections 2 stripping length 10 mm clamping screw m 2.5 blade size 0.6 x 3.5 mm tightening torque range 0.4...0.6 nm torque level with dms electric screwdriver 1 gauge to iec 60947-1 a2 solid, min. 0.5 mm2 solid, max. 4 mm2 stranded, min. 0.5 mm2 stranded, max. 4 mm2 flexible, min. 0.5 mm2 flexible, max. 4 mm2 flexible with ferrule, min. (din 46228/1) 0.5 mm2 flexible with ferrule, max. (din 46228/1) 2.5 mm2 flexible, min., ferrule with plastic collar (din 46228 pt 4) 0.5 mm2 flexible, max., ferrule with plastic collar (din 46228 pt 4) 2.5 mm2 twin wire-end ferrule, min. 0.5 mm2 twin wire end ferrule, max. 1 mm2 awg conductor size, min. awg 28 awg conductor size, max. awg 12 awg conductor size, min. 0.08 mm2 awg conductor size, max. 3.31 mm2 dimensions width 5 mm height of lowest version 38 mm length 44 mm ts 35 offset 22 mm disconnect terminals torque level with dms electric screwdriver 1 rating data rated cross-section 2.5 mm2 rated voltage 500 v rated impulse voltage 6 kv rated current 24 a standards iec 60947-7-1 current with max. conductor 30 a pollution severity 3 ul rating data voltage (ul) 300 v
product catalogue | terminals | screwing technology | sak-series modular terminals | ts 35 | polyamide pa 6.6 | modular feed-through terminals | 2,5 mm2 - 3 - ul rating data current (ul) 20 a min. cross-section (ul) awg 22 max. cross-section (ul) awg 12 approvals approvals institutes classifications etim 2.0 ec000897 etim 3.0 ec000897 eclass 4.1 27-14-11-20 eclass 5.0 27-14-11-20 eclass 5.1 27-14-11-20 similar products order no. part designation version 0499560000 sak 2.5/10/35 feed-through terminal, 2.5 mm2, screw connection, pa 66, beige, ts 35 0380460000 sak 2.5/35 feed-through terminal, 2.5 mm2, screw connection, pa 66, beige, ts 35 0380480000 sak 2.5/35 bl feed-through terminal, 2.5 mm2, screw connection, pa 66, blue, ts 35 0380440000 sak 2.5/35 or feed-through terminal, 2.5 mm2, screw connection, pa 66, orange, ts 35 0268880000 sakd 2.5/35 bl feed-through terminal, 2.5 mm2, screw connection, pa 66, blue, ts 35
|
